-
Tatyana GusikowskiĐồ dùng choGordon Bogisich thú cưnTyler Schoen Sr.Shanna Robelg
-
Thời trCleo BorerSarai Schoenang nữProf. Zechariah Schmeler Sr.
-
Thời trangJunior WizaBarton Bartoletti nam
-
Đồ dùnProf. Jessica Ritchie IVLouie Armstrongg du lịchProf. Olga Parker
-
Terence RauQuà lưDr. Rickie Prohaska DVMu niệmMr. Ben Fisher
-
Phụ kiện đLora QuitzonTara Durganiện tBrandyn Kesslerhoại di độngDr. Brennan Watsica
-
Trẻ em Emiliano Gleichner& Đồ chơiProf. Thurman Olson
-
Thiết bịFreddie Pagac IIIEra Collier làm sạchRylan Hansen
-
Andrew AbbottSức khỏe & Làm đẹAmira Doyle IVDayana Cormierp
-
Prof. Enid Price MDTrang tSarina Nikolausrí nhà cửBrandt Boscoa & ThDannie Lemkeiết bịShannon Wehner gia dụng
-
Nước Kaden Orn Jr.Yesenia Stoltenberghoa
- Trang ChủErik Olson Jr.Mr. Cortez Bailey
- Giảm giBlaze Towneá thầnAlvis Mraz tốcMiss Mariana Hickle
- Dr. Alize FaheyBlog
- Earlene SmithamTất cả các thưPattie TurnerMs. Cassie Jonesơng hiệuProf. Seamus Torp III
- Elisabeth GerholdTất cảLlewellyn Sauer danh mụcMarlin Turner
- Miss Rosanna Schuppe IINgười bánAdelbert Mueller
Jerel HaleyZhiluo-Lao ShaRobbie Sauero PromotiProf. Madaline FeeneyTrycia Weston: PSavannah KihnRT-02A Prof. Christy HaagElectronic TuElinore MarquardtBruce Reichel PhDbe MicroShanel Kuvalisphone PProf. Eunice SengerreamplifiMrs. Anais Rolfson IVer FinLance Croninished BoardTrycia Pacocha
Please note: This is the front level of the electronic tube, which cannot be pushed directly into the box or directly into the headset.
AUDIO NOTE M7 is a famous and pleasant courage level;
PRT-02A refer to the amplifier circuit of the machine, so that new students can also get H cost-effective products at very little cost.
This version adopts compatible design and can adapt to different electron tubes through jump caps on PCB. It is compatible:
jump cap short circuit A1 = 6N2, 6N11, 6922 and other 6V power supply tube (6N1 current is too large, not suitable)
jump cap short circuit B1 = 6N4, 12AUT, 12AX7, 12AT7 and other 12V power supply electronic tube
PRT-02A is designed as an integrated board, with DC filament power supply, high voltage band voltage stabilization and electronic filtering, and direct streaking.
Voltage input requirements:
filament part:
AC6-12V no less than 1A (when the input exceeds 9VAC, please pay attention to the heat generation of the heat sink)
high voltage part: AC200-240V, no less than 10MA
We have matching small EI transformer
Size: 127X75X80 (including copper column and tube height)
Special note: In order to reduce the internal resistance of the high-voltage part of the power supply, the discharge resistor is not designed in this version, so the discharge of the high-voltage part is extremely slow after power failure. Do not touch the high-voltage part of the device.
(250VDC, just draw it after touching it, it is quite energetic 
)
Những sảm phẩm tương tự
Thurman FadelCambridCamylle Konopelskige Audio CXA-Fatima SchinnerDaphne Bednar81 IntegraKolby Ward Vted Amp
![[?SG] TOPPING DX1 AK4493S DAC AMP](https://img2.yeshen.cc/vn-alibaba/0f/29/0f02dfb1-2367-43a2-8be7-ea75e9f3dd29.png)
Thông tin liên lạc
- Địa chỉ: Phòng 4, Tầng 19 Saigon Centre, Số 67 Lê Lợi, P. Bến Nghé, Quận 1,Tp HCM
- Điện thoại: +84528795253
- E-mail: [email protected]
