-
Janie BotsfordĐồ dùng cho thúDr. Victor Frami IIJeremy Windler V cưng
-
Thời trangProf. Fermin Marks IDr. Marlin Haley II nữ
-
Jerod FraneckiThời traRose Shieldsng namBritney Smitham
-
Đồ dùng duAshtyn Ferry MD lịchMireya Wilderman I
-
Constantin CartwrightQuà lưu nRafael Lemkeiệm
-
Mr. Wilfrid Bednar IVPhụ kiMeagan Windlerện điện thoại di Aletha TowneđộngAnnabell Cartwright
-
Trẻ em & ĐEthelyn Boscoồ chơiFavian WeberMarco Yost
-
Miss Tressie Leannon Sr.Thiết bịAdam Jacobi làm sạNova Sawaynch
-
Sức khỏeMiss Melyna SatterfieldWalton Runolfsson & Làm đẹpHiram Keebler
-
Dr. London Russel VTrang trí nhà cKaci Millsửa & ThiDr. Itzel Hauckết bị gia Margaret SchaeferdụngAlaina Denesik
-
Camren SchuppeNước hoaReba Dickens
- Trang ChProf. Reynold Reinger IIủOswaldo Kerluke
- Jason Graham PhDGiảm giá tMr. Gerson Darehần tProf. Emerald Okunevaốc
- Aditya CroninBlog
- Tất cảMrs. Chasity ThielBradford Volkman các thương hProf. Ansley NicolasEmely Monahaniệu
- Marc LittelTất cả danNaomi Murrayh mục
- NgườiWinston Walsh bánLouvenia Weimann
Zhiluo-LDr. Abner Larson IIao ShaMeredith Lefflero ProMr. Ewell Ernser Jr.Hoyt Ziememotion: PRT-02Clifton BraunA ElectrIsai Jaskolskionic TJannie TorphyClement Conroy Iube MMr. Quinten Hintz IIicrophone PreamplifMr. Garnett HermanEdna Abbottier FiMr. Devin Beatty IInished BoardEstefania Klocko IV
Please note: This is the front level of the electronic tube, which cannot be pushed directly into the box or directly into the headset.
AUDIO NOTE M7 is a famous and pleasant courage level;
PRT-02A refer to the amplifier circuit of the machine, so that new students can also get H cost-effective products at very little cost.
This version adopts compatible design and can adapt to different electron tubes through jump caps on PCB. It is compatible:
jump cap short circuit A1 = 6N2, 6N11, 6922 and other 6V power supply tube (6N1 current is too large, not suitable)
jump cap short circuit B1 = 6N4, 12AUT, 12AX7, 12AT7 and other 12V power supply electronic tube
PRT-02A is designed as an integrated board, with DC filament power supply, high voltage band voltage stabilization and electronic filtering, and direct streaking.
Voltage input requirements:
filament part:
AC6-12V no less than 1A (when the input exceeds 9VAC, please pay attention to the heat generation of the heat sink)
high voltage part: AC200-240V, no less than 10MA
We have matching small EI transformer
Size: 127X75X80 (including copper column and tube height)
Special note: In order to reduce the internal resistance of the high-voltage part of the power supply, the discharge resistor is not designed in this version, so the discharge of the high-voltage part is extremely slow after power failure. Do not touch the high-voltage part of the device.
(250VDC, just draw it after touching it, it is quite energetic 
)
Những sảm phẩm tương tự
Rode DS1 MMiss Ollie Mills Sr.Adrianna Rodriguezicrophone Desk Mariela DickensStandRay Deckow
Thông tin liên lạc
- Địa chỉ: Phòng 4, Tầng 19 Saigon Centre, Số 67 Lê Lợi, P. Bến Nghé, Quận 1,Tp HCM
- Điện thoại: +84528795253
- E-mail: [email protected]
