**Specification:
Supported Bluetooth Profiles: HSP 、HFP 、 A2DP、AVRCP
Supported Bluetooth Codec:AAC,SBC,LDAC
Battery Capacity: 45mAh*2+300mAh
Charging interface: Type-C
Control method: Touch
Call Noise Reduction: Three Microphone ENC Noise Reduction
Charge Time: 1.5H
Total Music Play Time 60% volume:Earphone-8h/charging case 2.5 times
Charging Input:5V/1A
Water resistance:IPX5
Total Standby Time: 20H
**How to use it?
Reset way: The headset is in the charging state in the charging box. Press and hold the headset for 10s, and the reset is successful: the red and white lights flash alternately twice
Entry/exit of DUT mode:DUT and pairing status are integrated
Connection and pairing:1. Open the charging box and pick up the headset. When the headset is turned on, it will enter a state of mutual matching, connection and search, which lasts for 3 minutes. At this time, the headset can be connected to the last phone or searched
2. In fact, it will be matched with the right headset within 1s, and enter the slave state
3. When the phone is turned on or off, long press the touch key 6S, and the headset will enter the pairing mode
Auto-turn off function if it is disconnected?---3min
**Basic Function
1. Master slave switch, left and right ears can be used separately
2. Listening to songs: switching songs (lower right, without switching function of the previous song), pause playing
3. Call: answer and hang up, call switching, and reject the call
4. Voice assistant (three clicks on the right ear)
5. Game mode (three clicks on the left ear)
6. ANC noise reduction and transparency mode
**Indicating light when in use
When charging the charging box, the indicator light shows:
1. When searching, the red and white lights of the host flash alternately, and the white light of the slave is always on. After the connection with the mobile phone is successful, the white light is always on (the master headset), and the white light is always on (the slave headset)
2. The indicator light is not on when playing, and the white light is always on when pausing
3. The white light flashes once for 1s when calling, and once for 3s when calling
4. The red light is always on during charging and goes out after being fully charged
External power supply to charging box power display:
Slow breathing under 20% red light
20% - 69% yellow light slow breathing
70% - 99% green light slow breathing
100% green light length
The headset indicator lights up and displays the current charge state of the charging box for 10s:
100% - 50% green
49% - 10% yellow
below 10% Red
Low power reminder, once every 2 minutes, four times for low power shutdown, accompanied by battery low
Package Contents:
1. Headset * 1 pair, charging box * 1
2. Charging cable * 1
3. Ear cap * 3 pairs (S/M/L)
4. Instructions * 1
5. APP card * 1