The SVS SB-4000 powered subwoofer demolishes all preconceivednotions about subwoofer performance and technology by taking command of anyroom with deep, effortless bass and adding visceral energy to every listeningexperience. With trickle down technology from the 16-Ultra Series, named topsubwoofers in the world by nearly every audio publication and industry group in2017, the SB-4000 obliterates expectations and delivers a level of unrivaledsubwoofer performance only available from SVS.
The SB-4000 subwoofer delivers on the full potential of theSledge STA-1200D amplifier’s power with precision and control to produce roomenergizing SPLs and effortless low frequency extension with pinpoint accuracyat all drive levels.
·Dual ferrite magnet motor assembly weighing nearly 40lbsgenerates immense magnetic force and excursion of the 13.5-inch driver to produce massive low frequency output well below the limits of human hearing.
·Edge wound voice coil with eight-layer aluminum flat wireminimizes distortion and power compression while providing excellent heatdissipation and linearity ensuring precise control.
·Lightweight and rigid composite cone with premium glass fiberdustcap generate massive output with pinpoint accurate frequency response.
·Proprietary injection molded gasket and long-throw parabolicsurround ensure longevity and allow extreme excursion and SPLs.
Rated conservatively at 1,200 watts RMS, and 4,000+ watts peakpower, the SB-4000 Sledge STA-1200D amplifier uses an efficient Class D designcombined with fully discrete MOSFET output and a sophisticated Analog DevicesDSP engine. The result is a level of effortless power and advanced processingnot available from any other powered subwoofer manufacturer.
Efficiency of a Class D amplifier with the ability to movemassive amounts of current through the fully discrete MOSFETs enabling immenseoutput and precise control for outstanding real-world subwoofer performance atall drive levels.
Most advanced digital processor ever used in a subwoofermaintains pinpoint accuracy and pristine sound quality through advanced in-roomtuning, optimized frequency response curves, powerful DSP controls and more.
Serves as a line conditioner, surge suppressor and voltageregulator letting the amplifier deal with wide voltage fluctuations andensuring the subwoofers operate flawlessly on any household circuit no matterhow unstable the incoming current. An isolated circuit creates a vanishinglylow noise floor by eliminating the potential for ground loop hums from outsidecomponents resulting in absolute sonic transparency.
Groundbreaking smartphone app works with Apple iOS® and Android®devices to unleash the full depth, force and nuance of the SB-4000 poweredsubwoofer by controlling all DSP functions including: volume, parametric EQ,low pass filter, phase, polarity, room gain, port tuning, custom presets andsystem settings.
·Connects via Bluetooth for convenient control even whensubwoofer is out of sight.
·3-band parametric EQ controller allows precise adjustments forfrequency slope and Q factor down to the single Hz level with four differentslopes, so users can improve performance by eliminating peaks, nulls and otherroom issues.
·Stores 3 custom presets for movies, music and other listeningexperiences such as sports or gaming.
·2-way feedback shows updates in real time on both the app and subwoofer interface
Acoustically Inert and Rigidly Braced Sealed Box Cabinet Design
Inlaid front panel display, rounded edges and a curved metal grille on the sealed box SB-4000 cabinet give it a refined yet commanding look that blends visually with home theaters and high-end audio systems. It’s sealed cabinet design results in tighter, more musical bass and make it significantly more compact than ported box subwoofers with similar specs.
·Double thick 2-inchMDF front baffle and rigid internal bracing to support the massive drive unit and to ensure an acoustically inert environment.
·Highly reinforced internal design and acoustic insulation eliminates all coloration or resonance from the cabinet, even when the deepest low frequencies are played at reference volume.
·Protective, non-resonant steel mesh grille and custom elastomer feet for reducing noiseartifacts within a room.
·19-310Hz ± 3 dB
·Roll-off slope specifically optimized to take maximum advantage of available room gain
·2-meter ground plane away from reflective structures (quasi-anechoic).
Subwoofer Specs:
·Premium Black Ash and Piano Gloss Black finish options
·Protective non-resonant steel mesh grille
·Front-firing13.5" driver
·Rear-mounted amplifier
·Screw-in rubber feet
·Robust Medium Density Fiberboard(MDF) cabinet construction
·Cabinet Dimensions(without grille): 18.3” (465mm) H X 17.8” (453mm) W X 18.6” (471.3mm) D
·Cabinet Dimensions(with grille): 18.3” (465mm) H X 17.8” (453mm) W X 20.9” (530mm) D
·Shipped Dimensions:23.5” (598mm) H X 23.5” (598mm) W X 28” (712mm) D
·Weight (unboxed): 102.3lbs. (46.4 kg)
·Shipped Weight:117.8lbs (53.45kg)
Driver Specs:
·High-performance SVS4000 Series Subwoofer Driver - optimized for sealed cabinet design.
·Proprietary 13.5”Driver with finely tuned Overhung Motor Configuration
·43lb (19.5kg) pound Woofer with 37.7lb (17.1kg) pounds for the motor
·Overhung 52mm Xmax,76.2mm X mech precision aligned excursion
·8-layer aluminum flat wire edge wound 3” voice coil for ultra-low distortion, efficient heat dissipation, exceptional linearity and nearly zero power compression.
·Two massive, dedicated toroidal ferrite magnets generate unparalleled levels of magnetic force todrive the highest levels of excursion, SPL, and start/go power for the deepestand most authoritative bass possible.
·All-new High densityFEA-optimized cast aluminum basket provides unequaled levels of rigidity, tensile strength, and energy transference available from a subwoofer.
·Dual 24-strand copper and Nomex composite high-temperature leads woven through the suspension provide a pristine electrical connection from the amplifier to the voice coil.
·Premium glass fiber laminated dustcap and reinforced and vented paper-composite cone sub-structureensure a light, rigid, and neutral radiating surface.
·Precision machined motor elements and narrow tolerance suspension parts produce unmatched linearity at full excursion for exceptionally tight and fast output, even atreference volumes.
·Extreme oversized low carbon vented steel U-yoke and top plate provide superior cooling and improved magnetics for maximum performance and efficiency.
·Copper ring shorting sleeve reduces gap induction and distortion, enhances thermal conductivity
·Nickel-plated high-tension spring terminals
·Proprietary injection molded gasket and parabolic SBR extreme-excursion surround maintains ideal pistonic motion for pinpoint accuracy and control
·Low carbon 1008 steel components with black electrophoresis plating
Amplifier Specs:
·Massively powerful Sledge 1,200-watt continuous Class D design with 4,000+ watts of Peak Power.
·Unmatched intelligence from user adjustable low pass, phase, polarity and room gain compensation with three parametric EQs and port tuning (Ported models only) for absolute bestalignment with speakers and optimized performance in any room.
·Groundbreaking SVS Bluetooth DSP control app for iOS and Android devices with three user presets allow custom tuning for every room and system.
·High efficiency cool-running Class D switching topology with massive 32 Amp 600 Volt MOSFET’sresult in lower EMI and highest efficiency while providing effortless power toproduce SPLs and low frequency output with pristine clarity well beyondreference listening levels.
·High resolution 50MhzAnalog Devices Audio DSP with double precision 56bit filtering is most advanced subwoofer processor available for perfect audio reproduction.
·100v-240v full range input active Power Factor Correction (PFC) pre-regulates mains to solid 360V DC regardless of mains voltage or quality so the sound quality never falters nomatter what’s coming out of the wall
·Active PFC lower saverage current and smooths mains input current allowing for 1200W output froma standard 15A mains circuit.
·XLR and RCA stereo input/output with ultra-wide input voltage for consumer and professional audio applications.
·Convenient front-mounted display featuring new Intelligent Feature Control (IFC) withbright blue dimmable/defeat able 8-digit LED front display.
·Custom EQ and DSP limiter settings tuned specifically for the SB-4000 sealed cabinet design.
·Auto/On and 3-30VAC/DC trigger for Maximum Installation Convenience.
·Input impedance 22kohm(unbalanced RCA)/ 22kohm (balanced XLR).
·Green 0.5-watt low standby power consumption
·RoHS compliant, lead-free construction, world-wide safety certifications
SVS App Specs:
·The most powerful and flexible Bluetooth controlled subwoofer DSP app, works with both iOS and Android operating systems.
·Easiest and most convenient way to adjust crossover frequencies, parametric EQ, polarity, room gain and all other bass management functions.
·Three convenient custom presets allow for perfect tuning in any room or system, from your favorite seat.
·Single tap adjustment for controlling variable port tuning with standard, extended and sealed modes.
·Unique bidirectional feedback shows adjustments in real time on both app and subwoofer interface.
·Easy-to-follow tutorial provides clear guidance for all functions.
Included Accessories:
·Protective non-resonant steel mesh grill
·IR remote control
·Elastomer feet included
·Extra heavy-duty, high current 6' power cord
·SB-4000 Subwoofer Manual
·Quick Start Guide